Fast, precise, and logical, Tech4 provides drafting and documentation that are technically correct and clearly convey the documents’ intent. Technical drawings need to be clear and concise. One look should be enough to see everything an operator needs to know. We draw all our schematics for easy reference and often show diagrams of the control systems for clear reference points. When Tech4 is used to modernize the control aspects of pre-existing equipment, we also update the existing drawings to reflect our new updates.

We continually update our hardware, software, and knowledge to ensure that our clients receive only the most advanced service. In systems that employ computer-based HMI, all documentation can be published online in HTML format allowing immediate access to system drawings or manuals via a web browser. Drawings can also be emailed, faxed, or mailed. If complete sets of project drawings are needed, prints and markups can be sent FEDEX or UPS overnight.

Tech4 provides complete CAD and technical writing for:

• Drawing Schematics

• Panel Layouts

• Bills of Material

• Theory of Operation

• Setup Operation

• Troubleshooting Manuals

• System Architecture

• Mechanical Drawings

• User’s Manuals in print or on CD

• Component placements and where to mount them

• FAT procedure manual with information on processes being tested with lines for signatures

• Writing Diagrams

Tech4 offers custom programming of new or existing control systems for any automation need. Make use of our deep knowledge in PLC platforms, motion control, tension control, and drive systems. Our extensive experience with many different automation platforms and applications provides us the experience and knowledge to accurately and efficiently develop your control and HMI programs. We only recommend control platforms and HMI/SCADA applicantions we thoroughly know and have successfully implemented.

Tech4 is fluent in the following PLC programming applications:

• Allen Bradley PLC

• Cutler-Hammer PLC

• GE-Fanuc PLC

• Modicon PLC

• Automation Direct

• Siemens PLC

• Telemechanique PLC

• Triconex TMR PLC

To streamline the installation of a new process, we recommend using our electricians to pull and land the wires to ensure that everything is properly connected. Tech4 takes great pride in doing some of the best wiring work in the industry, and our electricians’ skills can turn a jungle of cables into a clean and intricate installation that’s easier to access and maintain. Using our electricians saves time by removing the lengthy wire-check and troubleshooting of someone else’s work. If you have the electricians already on the project, we can supervise the installation of the machine wiring to ensure that it’s done to specifications.

Efficiency is key during the commissioning phase. Everything needs to be done right the first time to avoid delays. Tech4’s design engineers personally oversee each commissioning. Our specialized knowledge of how and why a process works helps us shorten the time from initiating the process to starting the machinery. Knowing the theory and instrumentation behind the process greatly increases how quickly it can turn around, saving time and money. To ensure that each step is properly carried out, we prioritize the tasks, and personally manage the process so every step is properly completed in the correct order and on time.

We use only design engineers for field service because they understand the machinery from a design perspective. More effective than a general technician, they have deeply worked with a wide range of industries from conversion to material handling, and they have the experience to quickly troubleshoot on the job. We understand both the theoretical and practical perspectives of what needs to be done, why and how it was designed, and what solution is best, right there on the spot. If you need immediate assistance, we will troubleshoot the problem over the phone.

After the control system is in place, we offer training so our clients know how to operate and maintain the system. Sometimes the technology is quite advanced from the clients’ previous applications, and we take the time to familiarize the operator(s) on the new processes, how it’s all put together, why it works, and how to monitor the specific applications. We go through each routine, carefully explaining what processes are in the code, where to find them, how to discern types of activity in all sections, and how the various controls and hardware are interrelated.